SETUP MT AVEE
Getting started with Avee is quick and eas y, you will be able t o start using your system in flight in no time! Follow the simple instru ctions below to setup your Avee products with your ANR headphones for use in your aircraft.
STEP 1: UNPACK YOUR COMPONENTS
Unpack your Avee kit, it should include the f ollowing
1X Microphone Add-On (with magnetic adhesive
1X Aircraft adapter cable
1X 3M cleaning wipes
STEP 2: PREPARE YOUR HEADPHONES
Grab your ANR headphones and the 3M cleaning
wipe supplied in your kit. Unwrap the cleaning sw ab
and clean the base o f your left headphone including
the area surrounding the input jack. E nsure that you
remove any residue that is adhered to the
STEP 3: CONNECTING YOUR MICROPHONE ADD-ON TO YOUR HEADPHONES
The Avee add-on is securely fastened to the headset with a small black adhesiv e strip. Embedded within the strip are two small magnets with their conterparts inside the microphone add-on base. The discrete adhesive strip provides a secure connection ensuring your add-on does not detach from the headphones du ring use. The magnets allow you to easily attach and detach the microphone add-on when required.
Remove the adhesive strip protective backing from the add-on base before connecting your microphone add-on to the headphones.
Guide the add-on t o the base of the
left headphone and firmly press it in
place. Once attached, carefully
unplug it to reveal the adhesive tape
applied to the headphones. Press firmly on the tape t o ensure all edges of the tape have adhered to the
The adhesive tape requires
24-72 hours to cure, this will
ensure maximum adhesion. We
recommend keeping the
add-on disconnected from the
headphones for at least
24-hours to provide
uninterrupted curing time.
YOUR SETUP IS COMPLETE!
Head over to the Using Avee page to learn more about using our products in your aircraft.